I never liked tile or vinyl floors. Of course, the quality of vinyl flooring has improved substantially over the years, yet getting up in the morning and having my warm feet struggle with the coolness that a tile floor can bring, still raises my anxiety level. And then there is the cleaning: whether it’s a… Continue reading I Like Dirt
Tag: floor
Floor covering
From the beginning I planned to replace the carpet by a similar product but a little compacter and sturdier. But during my last trip I was reminded how quickly such a small place can become dirty. So I started looking around for alternatives. A floating wood floor was attractive, but not practical when the floor… Continue reading Floor covering
Poll: Floor covering
As always, I am already thinking about and preparing for the next phase in this project. Before going any further, I’ll have to finish the floor covering. The easy way to go is a cheap, lightweight carpet, but soon I started thinking about office carpet for its durability. Then other choices popped up: Carpet: regular,… Continue reading Poll: Floor covering
The bed (2)
I am in a bit of a hurry, because I wanted to test the bed out on a trip to South Florida during the holidays. There is a lot of work, but fortunately much of the bed frame was pre-assembled of the last few weeks in my workshop. First I set up a few parts… Continue reading The bed (2)
Subfloor installation
One heavy piece of ½” plywood. Weight is always a consideration, both as in maximum payload and as in fuel economy. I estimate the weight of most items that I install and keep a total as a reminder. As for the plywood, I’ll need another sheet to finish the job. To size the plywood,… Continue reading Subfloor installation
Floor insulation
As a base for the interior, I decided to put in a ½” thick piece of plywood on top of ½” rigid insulation board. I started to fill in lengthwise indentations of the metal floor with strips of a thin insulation material, to maximize the R-value. Subsequently the insulation boards were applied. This… Continue reading Floor insulation
Rust and holes.
Now it is time to do some restoration work to the floor. A few areas had a some surface rust. A little sanding and some fresh paint took care of that. Now I had to fill the dozen or so holes in the floor, that were left after the removal of the bench, chairs and… Continue reading Rust and holes.
Subfloor removal
First thing I noticed was some water damage to the subfloor, which is to be expected after 20 years of use. It will be replaced with a regular ½ inch plywood panel. The wood is attached with a couple of metal screws to the metal floor. The rear 4 feet doesn’t have any insulation at… Continue reading Subfloor removal
Window frame & seat belts
Today’s first is the passenger side, large window frame. A fairly simple job, just a lot of screws. I’ll set this frame apart until I have the correct paint to redo it. Now we can see a little of the insulation used, some wire of the valance lighting which will be removed, and the… Continue reading Window frame & seat belts