In this final episode of the Onboard Compressor installation, I resolve some issues with the Engine Run signal from the Ford Transit. Previously I guided the compressor harness through the engine bay firewall to the area behind the glove box and from there, the wiring is guided behind the center console and under the floor,… Continue reading Onboard Compressor – Part 3
Category: ccp
Onboard Compressor – Part 2
In this second part of the Onboard Compressor installation, I show you how I extend some of the wires in the wiring harness of the compressor. The lengthening of the wiring harness is necessary to comply with Ford’s requirements to directly connect the harness to the vehicle battery (through the CCP – Customer Connection Point),… Continue reading Onboard Compressor – Part 2
Murphy Bed Cabinets
Mobile DVR, Wiring & Cabinets
RV Cabinets, Wiring & Floor Vent
Adding Amps To The CCP
Some time ago I ordered the CCP upgrade kit from my local Ford dealer and it was time to do the installation. My Transit van is equipped with only one battery and therefore only one 12V terminal that has a maximum load of 60 Amps. Before my last trip, I installed a small inverter that… Continue reading Adding Amps To The CCP